Universal Standing Seam Specifications
Universal Standing Seam panels have a snap-action seam to ensure a weathertight roof. An integral fastening hem provides for concealed fasteners with slotted holes to allow for the metal’s natural expansion and contraction.
Pre-Formed Flashings and Accessories
- Hip trim
- Vented and non-vented ridge trim
- Self-cleaning valley
- Combination starter strip/drip edge
- 3 gable trim options
- Sidewall flashing
- Matching coil stock
- Seams are 1.5” tall
- Color-matched butyl sealant
- RoofAquaGuard underlayment
- Optional snow guards
Standard and Custom Panels are 12” and 16” Wide
- Available in standard lengths of 6’, 10’ and 12’
- Custom lengths available
Steel: Universal Standing Seam is produced from top quality USA-made G90 galvanized steel. The metal thickness is .0216” before paint. All accessories and trims are made from matching metal.
Minimum Roof Pitch: 2:12
Finish: Universal Standing Seam is coated with a baked-on, protective primer and Kynar 500 ® or Hylar 5000 ® PVDF resin-based coating. Kynar 500 ® and Hylar 5000 ® are trade names for polyvinylidene fluoride resin. This high quality, industry-leading finish includes reflective pigment to maximize energy efficiency. The backs of each panel are finished with a protective clear coat.
For more information or architectural specifications, contact us .
is a registered trademark belonging to Arkema Inc.
Hylar 5000 ® is a registered trademark belonging to Solvay